Argon / CO2 mixture cylinder with 2% CO2 MIG welding stainless steel 14 liters

Refillable cylinder of Argon / CO2 mixture (C2) with 98% Argon + 2% CO2 charged at 200 bar (tested at 300 bar) suitable for welding stainless steel with MIG wire. UNI 1956 Argon / CO2 mixture cylinder with low quantity of CO2 (only 2%) suitable for welding on stainless steel with MIG wire due to a decrease in the calorific value of the welding arc that would occur with higher types of mixtures concentration of CO2 (carbon dioxide). This is a type "G" cylinder, this wording indicates the particular size of the cylinder, 21 cm wide and 60 cm high. The cylinder is to be used with a pressure reducer (to be purchased separately), suitable for the gas contained inside the cylinder, among the most common on the market. The "C2" Argon / CO2 Blend cylinder is sold: new in
Refillable cylinder of Argon / CO2 mixture (C2) with 98% Argon + 2% CO2 charged at 200 bar (tested at 300 bar) suitable for welding stainless steel with MIG wire. UNI 1956 Argon / CO2 mixture cylinder with low quantity of CO2 (only 2%) suitable for welding on stainless steel with MIG wire due to a decrease in the calorific value of the welding arc that would occur with higher types of mixtures concentration of CO2 (carbon dioxide). This is a type "G" cylinder, this wording indicates the particular size of the cylinder, 21 cm wide and 60 cm high. The cylinder is to be used with a pressure reducer (to be purchased separately), suitable for the gas contained inside the cylinder, among the most common on the market. The "C2" Argon / CO2 Blend cylinder is sold: new in steel The cylinder is equipped with a test certificate Complete with all accessories and finishing (collar, RESIDUAL valve, open cap and painting according to law) Gas INCLUDED Measures: Height 60 cm Diameter 21 cm Full cylinder weight 20.5 kg NB Most refilling stations require the cylinder to be equipped with a RESIDUAL VALVE in order to proceed with filling. ALL OUR CYLINDERS ARE RECENTLY MANUFACTURED and EQUIPPED WITH A RESIDUAL VALVE TESTS MUST BE CARRIED OUT EVERY 10 YEARS FROM THE REGISTRATION DATE MARKED ON THE CYLINDER To find out more, see our dedicated article on the blog
Refillable cylinder of Argon / CO2 mixture (C2) with 98% Argon + 2% CO2 charged at 200 bar (tested at 300 bar) suitable for welding stainless steel with MIG wire. UNI 1956 Argon / CO2 mixture cylinder with low quantity of CO2 (only 2%) suitable for welding on stainless steel with MIG wire due to a decrease in the calorific value of the welding arc that would occur with higher types of mixtures concentration of CO2 (carbon dioxide). This is a type G cylinder, this wording indicates the particular size of the cylinder, 21 cm wide and 60 cm high. The cylinder is to be used with a pressure reducer (to be purchased separately), suitable for the gas contained inside the cylinder, among the most common on the market. The C2 Argon / CO2 Blend cylinder is sold: new in steel The cylinder is equipped with a test certificate Complete with all accessories and finishing (collar, RESIDUAL valve, open cap and painting according to law) Gas INCLUDED Measures: Height 60 cm Diameter 21 cm Full cylinder weight 20.5 kg NB Most refilling stations require the cylinder to be equipped with a RESIDUAL VALVE in order to proceed with filling. ALL OUR CYLINDERS ARE RECENTLY MANUFACTURED and EQUIPPED WITH A RESIDUAL VALVE TESTS MUST BE CARRIED OUT EVERY 10 YEARS FROM THE REGISTRATION DATE MARKED ON THE CYLINDER To find out more, see our dedicated article on the blog