Polymaker-LW™ (Light Weight / low density) PLA 1.75mm 800 gram

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight. Is PolyLite™ LW-PLA good for RC Plane? Yes, PolyLite™ LW-PLA is designed for ease of print and strong rigidity. For more information check out the review below about PolyLite™ LW-PLA for RC Plane application. What is the difference between active foaming and passive foaming? PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed. What are the pros and cons between active and passive foaming? Active foaming:You need to heavily modify your printing settings depending on the temperature and setup to compensate the foaming expansion of the material when printing. You need to print at very high temperature to achieve light weight
PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight. Is PolyLite™ LW-PLA good for RC Plane? Yes, PolyLite™ LW-PLA is designed for ease of print and strong rigidity. For more information check out the review below about PolyLite™ LW-PLA for RC Plane application. What is the difference between active foaming and passive foaming? PolyLite™ LW-PLA is not an active foaming filament, which means it will not foam when extruded from the nozzle depending on the temperature. PolyLite™ LW-PLA is already pre-foamed. What are the pros and cons between active and passive foaming? Active foaming:You need to heavily modify your printing settings depending on the temperature and setup to compensate the foaming expansion of the material when printing. You need to print at very high temperature to achieve light weight results (~250˚), these high temperatures will create a lot of defects on the print such as stringing and blobs.At very high temperature, active foaming can achieve lighter print than passive foaming however the print may suffer of serious stringing defects. Passive foaming:You do not need to change any settings from your regular PLA settings (slight increase retraction) as PolyLite™ LW-PLA will offer light weight results even when printing at very low temperature (~190˚C). The lower the temperature the higher quality the print. Review of PolyLite LW - SoarKraft Bryant

Perimeter and carvacrol-loading regulate angiogenesis and biofilm growth in 3D printed PLA scaffolds - ScienceDirect

polymaker light weight pla 3d filament

Polymaker-LW™ (Light Weight / low density) PLA 1.75mm 800 gram

PolyLite LW-PLA White 1.75mm 800g Spool

Morphological evaluation of microcellular foamed composites developed through gas batch foaming integrating Fused Deposition Modeling (FDM) 3D printing technique - G Radhakrishna, Rupesh Dugad, Abhishek Gandhi, 2021

PolyLite™ LW-PLA is a special foamed PLA designed to print with similar settings as regular PLA but with half the weight., Is PolyLite™ LW-PLA good

Polymaker-LW™ (Light Weight / low density) PLA 1.75mm 800 gram

High-Quality PLA Filament, Designed for Reliability and Ease of Use, Made with Quality Raw Materials, 6.6 lb Weight Accuracy, 374 to 446°F Print Temperatures, 40 to 60mm/s Print Speeds. The Polymaker PolyLite PLA is designed as a high-quality PLA filament for reliability and ease of printing. Part of the PolyLite family of 3D printing filaments PolyLite PLA is made with quality raw materials to deliver exceptional quality and reliability.

Polymaker LW PLA Filament 1.75mm Black, Pre-Foamed PLA 800g Lightweight 3D Filament - PolyLite 3D Printer LW-PLA for Printing RC Plane, 190-210 °C

Tailoring diamondised nanocarbon-loaded poly(lactic acid) composites for highly electroactive surfaces: extrusion and characterisation of filaments for improved 3D-printed surfaces