Intellinet Power over Ethernet (PoE+) Splitter (560443)

Power over Ethernet (PoE+) Splitter, IEEE802.3at, 5, 7.5, 9 or 12 V DC output voltage - Retail Box
Deliver Power over Ethernet to remote devicesThe Intellinet Network Solutions PoE+ Splitter allows you to deliver both data and electrical power to non-PoE Ethernet-enabled products using the Cat5 Ethernet cable. Using the PoE Splitter, you can take advantage of Power over Ethernet and place Ethernet-enabled products, such as Network Cameras and Wireless Access Points*, where power outlets are not readily available.Simplify Installation for an Ethernet-based DeviceHaving to manage only an Ethernet cable simplifies the physical installation of the device. Without having to worry about the availability of a power source, you can mount Ethernet-enabled products on a ceiling or outdoors, up to 100m (328 feet)** from a power source. The PoE Splitter is simple to install and requires no tools or software.802.3af Compliant Power over EthernetThe PoE Splitter can be used to complement any PoE injector unit or midspan switch to provide small to medium-sized businesses a complete end-to-end PoE solution. This unit supports 802.3af and 802.3at, ensuring compatibility with other 802.3af/t PoE-compliant injector units or PSE switches.Adjustable Power OutputDuring the setup, the PoE Splitter can be set to power any compatible 5 V, 7.5 V, 9 V or 12 V Ethernet-enabled device via the volt selector located on the side.** Maximum distance per 802.3u specifications. Can be used to connect non-PoE IEEE 802.3af/t-compliant devices to a PoE injector or PoE switch Output voltage, selectable: 5, 7.5, 9 or 12 V DC Power output: 5 V / 4 A, 7.5 V / 2.7 A, 9 V / 2.3 A and 12 V / 1.7 A 10/100 auto-sensing input port automatically detects optimal network speeds RJ45 input port with Auto-MDIX and NWay auto-negotiation support Full/half duplex operation Compact metal case LED for link on PoE input port Fully NDAA-compliant Three-Year Warranty

Turn a higher-power PoE link into separate DC/terminal-block power and Gigabit data connections Need power but don t have an outlet? Take it from your PoE network with the Intellinet Industrial Gigabit PoE++ Splitter. With a simple Ethernet cable connected to your PoE++ Switch or injector, this Splitter can give up to 51 W to a non-PoE device in tough or industrial environments via your choice of output a 2-pin terminal block or a DC jack and still provide a gigabit network connection.

Intellinet 508940 Industrial Gigabit PoE++ Splitter

Intellinet Power over Ethernet (PoE) Injector (524179), overloaded circuits poe

Intellinet Power over Ethernet (PoE+) Splitter (560443) –

Intellinet Power over Ethernet (PoE) Injector (524179), overloaded circuits poe

Intellinet 560443 Power over Ethernet (PoE+) Splitter

IT Shopp - Online Shopping

Intellinet Power over Ethernet (PoE+) Splitter (560443)

New Intellinet 560443 Power over Ethernet (PoE+) Splitter Free Shipping 766623560443

Intellinet Power Over Ethernet (PoE+) Splitter, IEEE802.3at, 5, 7.5, 9 or 12 V DC Output Voltage - PoE Splitter - Black 560443

The Intellinet Network Solutions Power over Ethernet injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.