PoE Injector, PoE+ injector, PoE power injector

The Perle PINJ30 is a single port PoE mid-span injector fully compliant to PoE+ (30W of power) and PoE (15.4W of power)
PINJ130 - PoE Power Injector: One port 10/100/1000Base-T , 30 watts, IEEE 802.3at compliant. PoE+ and PoE compatible. EU AC Power cord included

Gigabit PoE Injector 802.3at PoE+ Adapter Power Over Ethernet unifi AP 1000Mbps

UBIQUITI PoE+ Injector (U-POE-at) - The source for WiFi products at best prices in Europe

TL-POE150S, PoE Injector

Black Box LPJ016A-T-R2 PoE Injector

Support Non-Poe Duplex Gigabit Speeds Network Distances up to 100M (328 ft) Black – OOSSXX

Use 12-60 Volt DC Power to Deliver 50 Volt IEEE 802.3at PoE+ Use the GAT-50v30w with any unregulated DC power source from 12 volts up to 60 volts to deliver a regulated 50-volt Active PoE+ up to 30 watts of power for WiFi - Cameras - or PoE Devices.

DC Powered PoE+ Gigabit Inline Injector That Converts 12-60V Volts to 50 Volt IEEE 802.3at PoE+

The Fastcabling 30W 802.3at PoE+ Midspan Injector can add power to the Ethernet cable and transmit data to front-end IP devices so that the PoE system can be set up. Both power and data are running over a signal Ethernet cable which makes the installation convenient and cost-saving. There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard-to-reach locations.

30W PoE+ Midspan Injector 10G/5G/2.5G/1G, 55V, 100-240VAC, for IEEE 802.11ax PoE APS, WiFi 6, Plug & Play, Wall/Desktop Mount, 1 Port, Upgrade Non-PoE

Gigabit Power Over Ethernet PoE+ Injector,Converts a non-PoE Gigabit port to a PoE+ Gigabit port and Network a PoE device located up to 100 meters (328 ft.) away.