Pro Micro (USB-C Version) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with. Note that this USB-C Pro Micro is longer than the Micro-USB Pro Micro by about 3mm. Also, due to the additional height of the USB-C port, your builds may require longer s

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with.

Note that this USB-C Pro Micro is longer than the Micro-USB Pro Micro by about 3mm. Also, due to the additional height of the USB-C port, your builds may require longer standoffs to allow it to fit inside of your case.

RP2040-based controller with a Pro Micro/Elite-C compatible pinout with tons of memory! Features Usage Info This controller can be used the same way

RP2040 Pro Micro 16MB/128Mbit USB-C Controller

QMK Proton C – Keebio

SuperMini nRF52840 Pro Micro Bluetooth LE (BLE) Controller – Keebio

Liked the original Elite-C but think it’s a bit too tall for you? We heard you loud and clear, so we replaced the original USB-C port with a mid-mount

Elite-C V4 - USB-C Pro Micro Replacement ATmega32u4

Spice up your DIY keyboard builds with this little microcontroller, which works with the TMK and QMK firmware. It's got 18 pins for you to work with.

Pro Micro (Micro-USB) - 5V/16MHz - Arduino-compatible ATmega32U4

Afternoon Labs Breeze Keyboard Kit – Keebio

RP2040-based controller with a Pro Micro/Elite-C compatible pinout with tons of memory!, Features, Usage Info, This controller can be used the same

RP2040 Pro Micro 16MB/128Mbit USB-C Controller

Buy Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board at Aliexpress for .

Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board

Liked the original Elite-C but think it’s a bit too tall for you? We heard you loud and clear, so we replaced the original USB-C port with a mid-mount

Elite-C V4 - USB-C Pro Micro Replacement ATmega32u4

OSOYOO Pro Micro 5V/16MHz Module Board with 2 Row pin Header Replace wit Pro Mini for Arduino : Electronics

Buy Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board at Aliexpress for .

Type-C MINI USB Pro Micro For Arduino ATmega32U4 5V/16MHz 3.3V/8Mhz Module With 2 Row Pin Header Leonardo Usb Interface Board

Pro Micro (USB-C Version) - 5V/16MHz - Arduino-compatible ATmega32U4 – Keebio

SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) - Compatible with Arduino development board 5V/16MHz microcontroller AP2112 3.3V Voltage Regulator Castellated PTH pin pads Reset button Maximum 6V input : Electronics